While your air conditioner can do a pretty good job of heating or cooling your house, sometimes it cannot do its job. There are entirely few reasons why this happens.
This article will focus on the most common reason your air conditioner struggles to keep you cool and comfortable.
If you’ve recognized that your HVAC system is not blowing cool air, it could be that the problem is with the refrigerant level. It’s pervasive for a dirty air conditioner coil to cause an inadequate flow of cold air. So when your AC stops blowing cold air, the first thing to do is check the refrigerant level.
5 Reasons Why AC Is Not Blowing Cold Air
Air conditioners work by blowing warm air over a cold evaporator coil, which causes the air to cool down. When this process is interrupted, your air conditioner isn’t blowing cold air.
There are several reasons why you may be experiencing this issue. Here are five common reasons for this problem, as well as solutions for each of them:
Leaking or Low Refrigerant
The refrigerant is responsible for absorbing and dissipating heat in the system. If there is a leak or low, it won’t absorb enough heat to cool your home correctly. A leak or low refrigerant level can cause your AC system to blow lukewarm or even warm air.
The refrigerant may be leaking through a hole in an evaporator coil, which can allow moisture to freeze on the coil. In addition, it can prevent the air conditioner from absorbing heat properly so that it won’t blow cold air.
Solution. (1) You’ll need a professional to check for leaks and replace or recharge your refrigerant. (2) If you see ice or frost anywhere on your unit, turn off the power immediately to prevent damage to your system. (3) Check the pressure on your refrigerant gauge.
The Filter Is Dirty or Clogged
When the filter gets dirty, it will block airflow into the system, which means that the coils won’t be able to absorb enough heat from inside your home to cool it properly.
The filter retains dust and debris from your air conditioner coils, so a dirty filter prevents the unit from operating efficiently. A clogged filter will also restrict airflow, which can cause it to freeze up.
Solution. (1) If the filter is dirty or clogged, you’ll need to replace it. It can be done quickly by unscrewing the screws that hold in place and then switching out the exhausted filter for a new one. (2) Inspect the filter every month and check if it needs cleaning or replacing.
Dirty or Damaged Coil
Your air conditioner has two coils: one indoor and one outdoor. The refrigerant flows through the coils to absorb and exchange heat. If it’s dirty, it won’t conduct heat properly, which means your AC will run less efficiently and not be able to cool your home.
An excellent way to tell if dust has built up on your coil is by looking at where it connects with the wall—if there’s dust there, it’s probably covered in gunk.
Solution. (1) You need to clean and disinfect the coil with a foaming disinfectant. (2) If the coil is damaged, you will need to replace it with a new one. (3) Make sure you clean your AC unit regularly and replace any worn-out or damaged parts.
Blocked or Clogged Register
Air registers are the small openings that allow cold air into your home from your vents. If they become blocked with furniture, carpeting, or other objects, the air won’t flow through them properly.
It means that they won’t be able to cool down your home effectively. It’s also possible that your ductwork could be damaged or improperly insulated.
Solution. (1) Use a vacuum cleaner to eliminate any debris from the registers so that they’re clear and unobstructed. (2) Clear out the registers and then install a new filter to prevent future blockages from happening. (3) using the nozzle to suction them out from the outside.
Your thermostat tells your AC when to turn on and when to stop running, so if it isn’t working properly, your AC won’t either. In addition, thermostats can become inaccurate over time, significantly if they are affected by excessive heat.
If the fan setting is fixed to on” instead of “auto,” this may be why your AC unit is not blowing cold air. If changing the settings does not settle the problem, you should check if the system needs recharging.
Solution. (1) Ensure your thermostat is set to cool and not heat. (2) Clean your thermostat contacts with a cleaner specifically designed for electronics. (3) Your thermostat may demand to be replaced entirely.
People Also Ask
How To Make an Air Conditioner Run Colder?
If you want your air conditioner to run colder, you’ll need some maintenance.
Before working on the AC unit, make sure you turn it off.
- Spray down the unit. You can use a hose tubing or a pressure washer for this step. Ensure you get all the dirt and debris out of the grills, the fan blades, and the condenser coils.
- Change your filters. If your filters are blocked up with dust and dirt, they’re not working correctly. So replace them when they’re dirty, and don’t forget to check them regularly.
- Check your air seals. If any cracks or openings in your ductwork, cold air can leak into your attic or crawl space instead of circulating through your home. Look for any leaks and seal them up using mastic tape or insulation.
- Use a fan. Use a fan in rooms that are not in use often or when no one is home or awake at night or during the day while you’re at work. It keeps the air circulating, cools down warm rooms quickly, and puts less strain on your air conditioner unit.
How To Make a Portable Air Conditioner Colder?
While portable air conditioners can help cool small spaces, they aren’t as effective as a traditional window unit or central air. However, you can do multiple things to make your portable air conditioner cooler.
- Close off the space that you are trying to cool. Allowing a lot of hot air into the room will make it much harder for your AC unit to lower the temperature in the room.
- Turn your air conditioner on early. If possible, turn it on before the space gets too hot so that it has a chance to work its magic before it gets unbearably hot in the room.
- Install your portable AC unit correctly and ensure it is adequately vented. Most departments require a venting hose that is installed in the window or door to allow hot air to be removed from the room while cold air is pushed in at the same time.
By doing a thorough cleaning and inspection at least once a year, you’ll get rid of dirt buildup that could clog vents that stop your unit from producing cold air.
Simple repairs can help extend the unit’s life significantly, while replacement will allow you to use new technology and provide better performance over time.
When it comes to keeping your AC system in good shape, there’s no such thing as too much preventative maintenance.